Silver Rear Car Parking Reversing with 4 Sensor Buzzer Mini box Kit
Product Description
Specifications: 1.Measuring the distance by radar 2.Alarm by three step Bi-Bi sound 3.2-8 sensors are available 4.Full-weather design, un-affected by wind, ice, snow & rain 5.Some other kinds of sensor colors and styles can be fitted. 6.High quality and easy to install Technical parameters: * Rated voltage: 12V DC * Operating range: 10.5V – 16V DC * Rated current: 50mA – 180mA * Detecting distance: 0.3 – 1.5m * Ultrasonic frequency: 40KHz * Working temperature: -30 to +70 deg. C Kit includes: Main box Four sensors and sensor spacers. Buzzer with about 2 meters cable power cable with about 60cm cable 21mm Hole Saw for drill hole on plastic bumper 3M double side sticker for stick the main box on vehicle User’s manual and installation guide
- with mini main box,dimension (8cm X 4.5cm X 2cm) which is easy to find a suitable place in the bac
- The buzzer sound in different frequency according to different distances.for car with plastic bumper
- 1) Measuring the distance by radar.2. 4 sensors for rear available,3. Alarm by Bi-Bi sound
- 4) Full-weather design, un-affected by wind, ice, snow & rain,5. Crescent shape digital display scre
- 7) High quality and easy to install
Silver Rear Car Parking Reversing with 4 Sensor Buzzer Mini box Kit
At only £15 I didn’t expect much but it was worth the gamble. Having a Transit, reversing is always a bit dodgy.
Sensor was easy to fit (leads could do with being a little longer for a van) and does the job it intends to do.
Ends up £15 well spent.
Rating: 3 / 5
These 4 reversing sensors are simplicity itself to fit and everything you need to do so, including the correct-sized hole borer, is contained in the box. However, do take your time over getting the sensors in the correct position as once you have drilled the holes, there is no going back! After that, it is simply a matter of passing the wires into the boot of the vehicle and plugging them into the control box. Finding the wire that gives power to the reversing light is simple and one wire connects to this wire, the other goes to a good earth. Place the sounder wherever you want it and the job is done. It will depend on how adept and/or confident you are, but it should not take more than an hour or so to complete.
Rating: 5 / 5
ancora oggi non ho istallato il prosdotto. quindi non posso dare un giudizzio. sono soddisfatto del venditore.
Rating: 5 / 5