New And Exciting Accessory Kit For Your Beloved Camera Improves Wired And Wireless Control From A Distance For Better Picture Quality And Professional Photography. Easy, User Friendly And Affordable, It Is The Ultimate Camera Gadget On The Market.

• Wireless Flash Trigger Fires A Flash From Any Camera With Hot Shoe Or PC Outlet
• Ideal For Mounting Hot Shoe Flashes Onto Light Stands, Working Distance Up to 100 Ft.
• Standard Shoe Mount Flash Units Can Be Mounted Directly Onto The Integral Hot Shoe, Which Also Provides The Triggering Power To The Flash
• Studio Strobes May Be Fired From The Pc Sync Terminal On The Receiver. 4 Channels Provide Isolation From Other Frequencies
• Receiver Includes 1/4″-20 Tripod Mount, Trigger Voltage Compatibility: 3-400v, Working Frequency: 433mhz

<- Read More Buy Now for [wpramaprice asin=”B0046VBWCE”] (Best Price)

Sigma 10-20mm f4-5.6 EX DC HSM Nikon fit lens

Buy Now for £359.99

Product Description
Petal lens hood for all 58mm lens threads. When used it does not allow for a lens cap to be fitted, lens hood will need to be removed to fit lens cap.
This lens hood screws into the front of your lens or filter as a very good alternative to an expensive original hood.
It also has a clamp collar nut that only needs a slight pressure to tighten onto your lens so it it not easily lost.. ( do not over tighten or you risk threading).
Some edge shadowing may occur depending on your lens.
Some Wide angle lenses may show excessive shadows and this hood is not recommended.
Internal focus lenses only recommended also otherwise the petal hood would spin as focus occurs.
Petal lens hood for all 58mm lens threads.

• Crown Shape Lens Hood, fits all lenses /filters of size 58mm
• Stops light coming into the lens at extreme angles and being reflected inside the lens
• 58mm diameter.
• Tightening lock nut.

Maxim – Petal Crown Hood 58mm for Canon 18-55mm Lens, clamp collar nut, also fits onto 58mm filter also fits Nikon, Tamron, Tokina, Sigma, Fuji, Pentax etc.. or any lens with a 58mm front thread diameter. By Maxim Foto Supplies.

Buy Now for £9.75

Product Description
This flash shoe can be attached to your light stand, insert your flash unit and umbrella and adjust your mount so it is at an optimum angle for getting great photographic results time after time.

• The part of tripod bolt is designed to fit over the top of light stand.
• Screw onto the bolt for mounting the flash unit.
• We sell hot shoe adaptor too, which can trigger the flash by optical sensor, it can be used with thi
• Not suitalbe for Nikon Flash but we have flash bracket for Nikon SB600 SB800 SB900, please visit our shop,thanks.
• We have white and silver umbrellas too.

Flash Shoe Holder Swivel Bracket Mount Light Stand for Canon 380ex,420ex,430ex,550ex,580ex,Sigma,Pentax,Olympus & other Flashgun.

Buy Now for £9.99

Product Description
Suitable For: Work with Hot Shoe Cameras,Wireless Remote Trigger Studio,Wireless Hot Shoe Flash Remote Slave Trigger Sensor,Work with flash units using universal hot shoe like CANON, Nikon, Sigma, Olympus, Pentax (except Sony,Minolta as they use a special hot shoe,but you can use convertor to make it compatible,we have them in our shop). # Optic control using method: 1. Use the built-in or extermal flash to be master flash. 2. Set YN460 at any place. 3. The master flash can be reflected the bright through the wall when us indoor, therefore there is more space for set the slave flash. 4. Please test the YN460 before use is for slave flash. # Please do not put any barrier between the master and slave flash, the barrier will block the optic signal. # The stand-by mode is over 30mins, it automatically to power saving mode when using the optic control mode. Product specifications: # Flash index: 33 Circuit design: IGBT Up/down ward angle: 0-90 degree Left/right angle: 0-270 degree Power Source: 4 X AA size batteries (Alkaline or Ni-MH are usable) Battery Life: 100 – 1500 times (with alkaline batteries) Recycle Time: 5 sec(with alkaline batteries) Color Temperature: 5600K Flash Duration: 1/800S – 1/20000S Flash adjustment: “7 difference flash power level ( 1/1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64 )” Power Saving: ” Stand by mode, 30mins to power off mode. 60mins to power off when using the optic mode. ” Dimensions: 72X135X85mm Net Weight: 250g Package includes: 1 x YN460 Flash Unit with built in white and clear diffuser 1 x Mini Stand 1 x Protector Bag 1 x English manual

• An optic control function for a slave unit. 2 difference slave mode for create multiplelight effect.
• Slave 1: YN460 follows to the pre-flash system. Set the main flash light to TTL mode (E-TTL and i-TT
• Set it into manual mode,it is also suitable for the standard flash light in the market.
• 1. Main Flash light setting:Please mount the flash light on the camera and turn the power on,
• or turn on the built-in flash.Press the Mode button to S1 or S2 mode.built in white&clear diffuser.

Electronic Speedlight Speedlite flash flashgun for canon 1Ds,5D,7D,30D,40D,50D,400D,450D,500D,550D,1000D,Nikon D700,D300,D100,D90,D80,D60,D40,D40x,D3,D2,D1,D5000,D3000,Olympus E620,E520,E510,E500,E420,Pentax,K20D,K200D,Fuji S5 Pro DSLR

Buy Now for £37.99